| Payment Type: | L/C,T/T,Western Union |
|---|
| Incoterm: | FOB,CFR,CIF,FCA |
|---|
| Min. Order: | 1 Set/Sets |
|---|
| Delivery Time: | 30 Days |
|---|
Product Description
Cat D9R D9T Track-Type Tractor
Excellent tractor construction machinery CAT D9R D9T crawler bulldozer for promotion
Tractor construction machineryCAT D9R D8T crawler bulldozer CAT D9R D9T Large Dozer
| Engine Model | Cat® C18 ACERT™ |
| Flywheel Power | 306.0 kW |
| Bore | 145.0 mm |
| Stroke | 183.0 mm |
| Displacement | 18.1 l |
| Emissions | U.S. EPA Tier 2/EU Stage II Equivalent and U.S. EPA Tier 3/EU Stage IIIA Equivalent |
| Engine Power - Gross SAE J1995* | 334.0 kW |
| Engine Power - ISO 14396 | 329.0 kW |
| Engine Power - Net SAE J1349/ISO 9249 | 306.0 kW |
| Net SAE J1349/ISO 9249 | 306.0 kW |
| Note (1) | * Excludes all fan losses. |
| Note (2) | Engine ratings apply at 1,833 rpm. |
| Note (3) | Net power advertised is the power available at the flywheel when the engine is equipped with fan at max speed, air cleaner, muffler and alternator. |
| Note (4) | No derating required up to 2286 m (7,500 ft) altitude. High altitude attachment available for greater than 2286 m (7,500 ft). |
WEIGHTS
| Operating Weight | 47872.0 kg |
| Shipping Weight | 35746.0 kg |
| Note (1) | Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator. |
| Note (2) | Shipping Weight: Base machine chassis with cab, pivot shaft, roller frames, track and ROPS. |
TRANSMISSION
| 1 Forward | 3.9 km/h |
| 2 Forward | 6.8 km/h |
| 3 Forward | 11.7 km/h |
| 1 Reverse | 4.7 km/h |
| 2 Reverse | 8.4 km/h |
| 3 Reverse | 14.3 km/h |
| 1 Forward - Drawbar Pull | 716500.0 N |
| 2 Forward - Drawbar Pull | 400500.0 N |
| 3 Forward - Drawbar Pull | 222500.0 N |
HYDRAULIC CONTROLS
| Pump Type | Piston-type pump geared from flywheel |
| Pump Output - Steering | 387.0 l/min |
| Pump Output - Implement | 226.0 l/min |
| Tilt Cylinder Flow - Rod End Flow | 140.0 l/min |
| Tilt Cylinder Flow - Head End Flow | 188.0 l/min |
| Bulldozer Relief Valve Setting | 26200.0 kPa |
| Tilt Cylinder Relief Valve Setting | 19300.0 kPa |
| Ripper - Lift - Relief Valve Setting | 26200.0 kPa |
| Ripper - Pitch - Relief Valve Setting | 26200.0 kPa |
| Steering | 40500.0 kPa |
| Tank Capacity | 89.0 l |
| Note (1) | Steering Pump output measured at 1,800 rpm and 30 000 kPa (4,351 psi). |
| Note (2) | Implement Pump output measured at 1,800 rpm and 20 000 kPa (2,900 psi). |
| Note (3) | Electro-hydraulic pilot valve assists operations of ripper and dozer controls. Standard hydraulic systems includes four valves. |
| Note (4) | Complete system consists of pump, tank with filter, oil cooler, valves, lines, linkage and control levers. |
UNDERCARRIAGE
| Shoe Type | Extreme Service |
| Width - Shoe | 610.0 mm |
| Shoes/Side | 43 |
| Grouser Height | 84.0 mm |
| Pitch | 240.0 mm |
| Ground Clearance | 596.0 mm |
| Track Gauge | 2250.0 mm |
| Length - Track on Ground | 3470.0 mm |
| Ground Contact Area | 4.24 m² |
| Track Rollers/Side | 8 |
| Number of Carrier Rollers | 1 per side (optional) |
| Note | Positive Pin Retention Track. |
SERVICE REFILL CAPACITIES
| Fuel Tank | 889.0 l |
| Cooling System | 101.0 l |
| Engine Crankcase* | 34.0 l |
| Power Train | 164.0 l |
| Final Drive - Each | 15.0 l |
| Roller Frames - Each | 45.0 l |
| Pivot Shaft Compartment | 30.0 l |
| Hydraulic Tank Oil - Only | 89.0 l |
| Note | * With oil filters. |
BLADES - 9SU
| Capacity - SAE J1265 | 13.5 m³ |
| Digging Depth | 606.0 mm |
| Ground Clearance | 1422.0 mm |
| Height | 1934.0 mm |
| Maximum Tilt | 940.0 mm |
| Total Operating Weight** - With Blade and Single-Shank Ripper | 47872.0 kg |
| Weight* - Without Hydraulic Controls | 6863.0 kg |
| Width - Over End Bits | 4310.0 mm |
| Note (1) | * Includes blade installation arrangement, blade tilt cylinder, and blade lift cylinders. |
| Note (2) | ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator. |
BLADES - 9U
| Capacity - SAE J1265 | 16.4 m³ |
| Digging Depth | 606.0 mm |
| Ground Clearance | 1422.0 mm |
| Height | 1934.0 mm |
| Maximum Tilt | 1014.0 mm |
| Total Operating Weight** - With Blade and Single-Shank Ripper | 48460.0 kg |
| Weight* - Without Hydraulic Controls | 7388.0 kg |
| Width - Over End Bits | 4650.0 mm |
| Note (1) | * Includes blade installation arrangement, blade tilt cylinder, and blade lift cylinders. |
| Note (2) | ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator. |
RIPPERS - ADJUSTABLE PARALLELOGRAM SINGLE-SHANK STANDARD/DEEP
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 882 mm/817 mm (34.7 in/32.2 in) |
| Maximum Penetration - Standard Tip | 1231 mm/1727 mm (48.5 in/68 in) |
| Maximum Penetration Force - Shank Vertical | 158 kN/172 kN (35,520 lbf/38,667 lbf) |
| Note (1) | * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator. |
| Note (2) | Single-shank ripping arrangement weight includes pin puller. |
| Number of Shank Holes | 3 |
| Overall Beam Width | NA |
| Pry-Out Force | 332 kN/331 kN (74,637 lbf/74,412 lbf) |
| Total Operating Weight* - With SU-Blade and Ripper | 47872.0 kg |
| Weight - With One Shank | 4293 kg/4420 kg (9,464 lb/9,744 lb) |
RIPPERS - ADJUSTABLE PARALLELOGRAM+MULTI-SHANK
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 879.0 mm |
| Maximum Penetration - Standard Tip | 798.0 mm |
| Maximum Penetration Force - Shank Vertical | 154.0 kN |
| Note (1) | * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator. |
| Note (2) | + Includes (1) shank, add 347 kg for each additional shank. |
| Number of Shank Holes | 2 |
| Overall Beam Width | 1330.0 mm |
| Pry-Out Force - Multi-Shank Ripper with One Tooth | 361.0 kN |
| Total Operating Weight* - With SU-Blade and Ripper | 48221.0 kg |
| Weight - With One Shank | 4153.0 kg |
WINCHES
| Winch Model | PA140VS |
| Weight* | 1790.0 kg |
| Oil Capacity | 15.0 l |
| Increased Tractor Length | 557.0 mm |
| Drum Width | 320.0 mm |
| Wire Cable Diameter - Optional | 32.0 mm |
| Wire Cable Diameter - Recommended | 28.0 mm |
| Maximum Drum Capacity - Optional Cable Length | 62.0 m |
| Maximum Drum Capacity - Recommended Cable Length | 78.0 m |
| Note (1) | Variable speed, hydraulically driven, dual braking system, three-roller fairlead. |
| Note (2) | * Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
| Wire Cable Ferrule Size - Length | 70.0 mm |
| Wire Cable Ferrule Size - Outside Diameter | 60.0 mm |
STANDARDS
| FOPS | FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II. |
| ROPS | ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria SAE J1040 MAY94, ISO 3471:1994. |
| Sound (1) | Operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 77 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
| Sound (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A). |
DIMENSIONS (APPROXIMATE)
| Drawbar Height (Center of Clevis)* | 763.0 mm |
| Ground Clearance* | 596.0 mm |
| Height - FOPS Cab* | 3820.0 mm |
| Height - ROPS/Canopy* | 4000.0 mm |
| Height - Top of Stack* | 3919.0 mm |
| Length - Basic Tractor - With Drawbar | 5180.0 mm |
| Length - Basic Tractor - With Winch | 5545.0 mm |
| Length - Track on Ground | 3470.0 mm |
| Length - With Multi-Shank Ripper | 6538.0 mm |
| Length - With SU-Blade** | 6880.0 mm |
| Length - With Single-Shank Ripper | 6529.0 mm |
| Length - With U-Blade | 6967.0 mm |
| Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
| Note (2) | **Includes drawbar. |
| Overall Length - Basic Tractor | 4910.0 mm |
| Overall Length - SU-Blade/SS Ripper | 8230.0 mm |
| Track Gauge | 2250.0 mm |
| Width - Over Trunnions | 3300.0 mm |
| Width - Without Trunnions - Standard Shoe | 2880.0 mm |
Contact us if you need more details on Cat D9t Dozer for Sale. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cat Construction Equipment、Cat Bulldozer Heavy Equipment. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Cat Crawler Bulldozer > Cat D9R Crawler Bulldozer
